• From 2022-05-01

  • US Free Shiping

  • 5%OFF $79+

  • 8%OFF $159+

  • 10%OFF $299+

  • day ::

By BoLiTronics| Last Updated

Summary :

Often people want to know why headphones have so many disadvantages concerning sound distortion. For this reason, this article will provide quick answers to your questions. Here you will know everything you need to know about headphones and how they should be used correctly. People need to know what to do when their headphones are not working.

Quick Navigation :

If you feel that the headphones you have are distorted, you must try a different audio application. Surely the problems have nothing to do with hearing aids. Updating your connection may fix the sound issue.

If your headphones sound strange, you must solve the problem with several tips.woman-with-question-marks_274619-1211

1. You must make sure that where the audio is connected is fully inserted. The straight connector, which looks like an L, is connected to the sound device’s headphones.

2. You have to check that the audio source works well and is turned on.

3. If the audio source is a laptop or computer, you need to adjust the settings.

4. If your headphones still sound distorted, it is advisable to try another cable.

It is pretty awkward when you want to listen to music, but you only hear static noises in the headphones. Therefore, it is ideal to know the reasons why headphones produce static noise.

• Incorrect audio settings

Sometimes the root cause of static in headphones is improper audio settings. So make the changes that are required.

• Cables disconnected or loose

Although almost always, headphones are created properly there is a possibility that the internal headphone cables are loose, disconnected, or faulty to cause quite annoying noise. The headphone cables where they are connected to the 3.5mm audio jack are weak.

Some people pull in the area where the cables are, causing them to end up disconnecting. When you disconnect or connect headphones to a device, you always need to keep them in the audio jack. Never pull on the cable.

• Damaged speaker

You must take a look at your joint hardware, so you don’t waste time reconfiguring it. To know if the problem has to do with the speaker, it is essential that you connect them to an audio device that you know is in good condition. If the sound continues, the hardware is probably having problems.

It did determine that the static headphone issue has nothing to do with loose cable, Bluetooth interference, and hardware issues. Then you can fix the issue by changing all the settings of this device.


You need to follow the steps mentioned below for sound distortion in headphones.

1. Clean the connections properly

• Clean the plug with a dry cloth.

• Clean dirt and any foreign objects that are in the headphones.

2. Check the setting

• If the headphones fall out of your ears, you can replace the tips with others that fit more securely.

• The pads if they are deteriorated or damaged.

3. Verify the connection

• Unplug earphones or headphones from the device. Insert it again and make sure they are plugged in correctly.

4. Check the device

1604393531980_200x215• If there is no sound on the right side of the headphones, it may be that the connector on the device is one channel instead of two channels.

• Check how the device’s battery is.

5. Other things you should consider

• You may hear popping or cracking sounds when you insert the headphones and then stop. Sounds tend to disappear when headphones stabilize.

• The plug part uses it to disconnect or insert the headphones from the device correctly.

You must follow several vital tips to solve the static noise problem that headphones have.

• Cleaning

You must use headphones to get audio jacks from the computer. This will surely make the disturbances lessen. You can use alcohol to clean, so clean very carefully. Turn off the computer and unplug the cables before you start cleaning.

• Update the headphones

You must always update your headphones so that you can avoid static noise.

There are many different styles of headphones on the market today. Thanks to technology, better models are launched every day. But in some moments, the headphones stop working. Therefore, it is ideal for getting a solution. There are various problems that headphones cause; below are several tips that you should not miss.

• Turn on the headphones.

Some headphones have a built-in battery, and these will not work if you connect them to a headphone jack without turning them on.

• Turn the headphones off and on

This type of advice works with bad headphones or faulty computers. If the headphones are not working properly, you need to turn them off and then on again as soon as you plug them back in.

• Charge the headphones

Some headphones work well with LED lights. They need a different source of power. If you have not used your hearing aid for a long time, the battery is probably dead, so you will need to recharge it.

• Note USB compatibility

Almost all computers have to connect to this type of headset. But there are game consoles, which with USB headsets do not work. Suppose the device you own does not allow these USB headphones. It would help if you changed them for a traditional audio connector.

• Turn on Bluetooth on the headphones

If you want to use a wireless game, you will probably have to turn on the switch to connect to these devices.

• Turn up the volume

If you can’t hear anything on the headphones, you’ve probably accidentally lowered the volume or muted them. Check the volume buttons and turn them up.

In closing, I hope this article has helped you learn everything about hearing aids. Follow the tips that have been named so that you get the expected results. Hearing aid manufacturers are creating better models capable of meeting the needs of fans at all times.

At present, the headphones are offering unique benefits; they are competent. To select the model that suits what you are looking for because each person has a different need. As for the price, you will see different prices for all consumers in the market, thinking about everyone’s pocket.