• From 2022-05-01

  • US Free Shiping

  • 5%OFF $79+

  • 8%OFF $159+

  • 10%OFF $299+

  • day ::

By BoLiTronics| Last Updated

Summary :

Discover how the cables from your traditional headphones can make a difference in the sound you receive in your ears. Know the types of headphone cables, their length, and how their composition affects sound quality. Learn how to replace headphone cables so that you finally figure out whether their composition affects the sound.

Quick Navigation :

Headphones are devices that serve as a connection between your mobile device and ears to make you carry the sound. This reception system in sound waves is not very complex, very useful, and excellent and has evolved. Traditional or wired headphones have different types of cables for their operation, including:

• 2.5-millimeter cable: you can have this type of cable in your headphones available for your phone or other tiny electronic devices. Some devices do not accept this generic cable because its composition focuses on a custom type of headset.

• 3.5 mm cable: a cable that is in headphones available for portable players, sound equipment, and MP3 player. This type of cable is also present in computer headphones; they are known as 1/8-inch cables.

• 6.3 mm cable: they are used for amplifiers, electric guitars, large stereos, among other devices. You can buy this headphone cable with a ¼ inch measurement.

The headphone’s composition is divided into three cables, 2 for each end of the speakers and one for the ground. You can identify these wires by discovering the coating on them; the ground wire is not covered and has a different color. You must know how to identify the headphone cables very well to repair them if you wish.

If you connect the cables wrongly, nothing will happen in any way; the sound device will not work or be damaged. The ground wire is the most important of all, where you have to connect it very well. Side speaker cables are important, but their composition is more complex because of their connection at each end for the ear.

According to their low, mid, or high range, headphone cables use different materials for different sound experiences. You can find among the materials for these cables:

• Copper: The most common material used in mobile device headphones; it is solid, warm, and good texture. This type of cable has exhibited many long-term failures so that you will have a limited level of listening experience.

• Silver: This is a medium / high-end headphone material that you can buy at a reasonable price but higher than copper. You can see the differences in sound in this cable, where it is more defined in each music tune.

• Gold: This is the most expensive material that you can buy for your headphones, although it is not worth it for its performance. Gold is a comparative copper cable for headphones; it has good music quality but with a higher price. To invest in this type of headphones, you should do it in the previous two; it saves money.

• Hybrid cables: These cables are created in a synthetic way taking the best properties of copper and silver for your headphones. They have a very good level of support for sound; their quality is varied depending on the brand that promotes it.

You have to choose the silver or hybrid cable found in most high-end headphones. With this material in your composition, you will have an incredible experience in sound; it is very stable. This material’s duration is extensive; they support a lot of intensity in waves with the same stable transmission for your songs.

An alternative is for you to research the best online stores and get the copper headphone cable. This material is not bad, it even has greater durability than silver, but it is frequently used in low-denomination headphones. You can save some money by buying a headphone with this type of cable and a professional composition on its speakers.

Yes, the headphone cables can give you a different sound experience, perhaps improved or noisy depending on the material. You can make a comparison between low-end headphones with copper wire and high-end headphones with silver wire. The song’s harmony is very different, and this is due to the number of frequencies that each material used supports.

The length of the cable in headphones has no negative effect on the sound you are prepared to hear. A headphone cable can go up to 3 meters without problems, and its result will be the same as a short cable. For you to be convinced, a headset is usually 1 meter long, too short to affect its performance.

Among the attributes of the cable that affect the quality of the sound in your headphones are:

• Connectors: The connectors on each speaker on the sides for your ears play an important role in your listening experience; you have to buy the best ones. If the connector is built with Zinc, your experience level will be limited; they must be copper or silver, at least.

• Coating system: The cables must be well protected to prevent them from becoming entangled in their internal system and compromising its operation. You have to buy a very good looking pair of headphones with a quality plastic coating.

• Copper or silver conductors: Finally, you have to know that conductors have an important role; you must buy the best. The best of the sound conductors are silver, although its price is very high compared to copper.

Q1: Why Do Many Headphones Wires Have Different Lengths?

Some headphone models have one cable larger than the other for you to hold around your neck while running. You have to pass the long cable behind your neck, preventing them from falling when you run. This system is simple but effective if you decide to listen to music while walking, jogging, running, among other activities.

Q2: Can Headphone Wires Be Replaced?

Yes, you can replace the cables of your headphones at your own risk if you cannot find a cable compatible with them. This replacement is easy; you have to connect the cables to each speaker, and to the end that would be connected to the mobile device. The process is worth it if you buy the wiring and connectors correctly and apply a good cable coating.

Q3: How Do You Replace Your Broken Headphone Cables?

You must do the following:

- Disconnect the broken speaker wire, separate it from the other wire and the ground line.

- You have to place an equal size headphone cable, either 2.5 or 3.5mm.

- Use the soldering iron and tin to help you sell both ends of the new wire to the speaker and connect to the device.

- Apply a good coating to the cable you replaced and the others that were working.

Q4: Do You Know Why Your Headphones Keep Breaking?

You probably have a short circuit somewhere in the cable in your headphones due to misuse. You have to avoid bending the cable, pulling it roughly, or breaking it in any way. If you are tired of repairing the sound device because it keeps breaking, you have to replace it and use it in a better way.

Headphone cables have an important function for you to listen to your best songs daily, so it is good to know them. Knowing how important these cables are, you can focus on buying a pair of headphones with a perfect composition. High-end headphones are defined by having the best properties of this cable in material and speaker connectors.

Buying the best cable for headphones, you can take the initiative to replace them; it is an easy method that you can do without help. You can save a lot of money by knowing how your headphones work, repair your sound devices, and make them last longer. 8-)